green-creative_lamp_2

PAR38 19W HO

250W HALOGEN / 39W CMH LED REPLACEMENT This TITANIUM LED SERIES PAR38 HO has been designed and engineered for demanding commercial applications and runs on universal voltage 120-277V. At just 19W, this LED lamp replaces a 250W halogen or 39W CMH. The lamp emits 1775 lumens in warm white with over 10,000 candela. Simply install this retrofit solution in your existing fixture ...
adminPAR38 19W HO
hydrel_1

CEDAR LED

LED WET LOCATION ACCENT LIGHTING The Cedar LED Series low voltage accent lights are suitable for a variety of mounting applications including ground, wall, tree, sign and architectural accents. Suitable for wet locations. Go To Product Page
adminCEDAR LED
signageinstallation

T-BAR DIRECTIONAL SIGN

TBAR LED SMARTLIGHT ACRYLIC SIGNAGE The T-BAR LED Directional Sign is made with a full piece of PMMA acrylic with diffusing edges to allow for the double function of lighting device and signage. This is a great solution for customized signage that can also maintain a modern uniform lighting design throughout the architectural space. Go To Product Page
adminT-BAR DIRECTIONAL SIGN
image

KL-FG-2X2-3LEDB

2X2 HIGH OUTPUT CLEANROOM LED RECESSED FIXTURE Housing:   One piece, robotically seam welded, hole free 20-gauge CRSconstruction. Each are only 5.8 inches tall. Door Frame:   One-piece overlapping style 18-gauge CRS or 20-gauge type 304 stainless steel or aluminum door frame with 90° perimeter bend, hinged to housing with two stainless steel cables. Secured by captive stainless steelscrews. Reflector:   Die formed metal with high reflectance white polyester powder coat finish. Typical ...
adminKL-FG-2X2-3LEDB
evoopendownlight_evo-4-inch_jpg

EVO Open Downlight

EVO LED Open Downlight High performance solid-state recessed luminaire that blends quality of light with solid state illumination. High performance patented Bounding Ray® optics Multiple lumen packages and aperture sizes provide exceptional uniformity and energy savings in design choices. CONTROLING LIGHT / With eldoLED drivers dimming to 1% or 0.1% via 0-10V, DALI or DMX/RDM and nLight by Acuity Controls, ...
adminEVO Open Downlight
110 SC Series

110SC Series

Performance Wall Mount Fixture HOUSING & FRAME Heavy-duty, die cast aluminum housing and frames. Stainless steel external hardware. LENS/GASKETING One-piece opal white impact resistant U.V. stabilized polycarbonate or frosted glass lens. Silicone rubber gasket. ELECTRICAL Ballasts shall be readily accessible. Porcelain socket supplied for HID medium Base lamps (not included). FINISH Black, white, bronze, or silver gray polyester powder paint. ...
admin110SC Series
fp_downlight_FLS2_LS2_RD_AA_2

ID+ 2.5″ Adj. Accent

2.5" Adjustable LED Downlight DESIGN. 2.5” aperture round LED adjustable Adjustable accent allows for hot aiming with locking 40° vertical tilt and 362° rotation, rotating light shield reduces lost light and blocks view to luminaire interior in aimed positions Parabolic reflector mimics traditional look of MR16 Trim flange is field-paintable PERFORMANCE. A true alternative to halogen MR16 15°, 20°, 40°, ...
adminID+ 2.5″ Adj. Accent
EcoSpec-Linear-INT-High-CRI-90+1

Linear INT High CRI

EcoSpec® Linear INT High CRI: 90+ The EcoSpec Linear INT series is now also available with a 90+ CRI rating. Color Rending Index (CRI) is a measure describing a light source’s ability to represent various object colors as compared to a natural light source, such as daylight or incandescent. CRI is calculated from the differences in the chromaticities of eight CIE ...
adminLinear INT High CRI
DM_Lighting

9030

Architectural Pendant This architectural pendant series adds style to any decor. Other bar configurations are available, upon request, to make the fixtures your own. Matching wall sconces are available to complete the look. Go To Product Page
admin9030
p1st_b

P1ST

1W Square LED Step Marker Light Available in Cool White, Warm White, and Blue Die-cast aluminum housing with corregated steel reflector Resistant to shock and vibration Hardware included for mounting Must be used with a Class II 350mA electronic driver to provide power to the LED fixture(s) cULus listed Suitable for damp locations Go To Product Page
adminP1ST
ibcGetAttachment-1

WSC15-IRW

Self-Powered Wireless Controls The Wireless Occupancy Sensors (WSCxx-IRW) have built-in solar cells that draw on available ambient light to power themselves and can operate for up to 48 hours in total darkness. Batteries are not required for continuous operation, however batteries can be added as an option for applications without available ambient light. For improved detection, the sensors use an ...
adminWSC15-IRW
cole-lighting

CH180 Pendant

Church Lighting These cylindrical fixtures provide an even luminous surface with top and bottom banding, with or without vertical wood accent elements. Steel channels may be substituted for the wood, or the accents can be deleted. Pendant, wall, and surface ceiling mounted versions are offered. Go To Product Page
adminCH180 Pendant
prod1

Dorothy LED Bollard

Decorative Outdoor Bollard 11W LED bollard for installation outdoor made of die-cast aluminum structure. EN AB 47100 alloy (low copper content). Aluminum alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire ...
adminDorothy LED Bollard
LEDTAPEHP_large

LEDTAPE-KIT

INTERIOR WARM WHITE LED TAPE KITS The art of flexibility is perfectly demonstrated with DALS LED Tape lighting solutions. An excellent choice for a variety of applications such as bedrooms, kitchens and workspaces. KEY FEATURES Over 50,000 hours of service life Warm white light (2700K) Excellent color rendering Superior LED performance and lifespan Minimal heat emission Go To Product Page
adminLEDTAPE-KIT
Screen Shot 2015-09-20 at 9.57.17 PM

Architectural Wood Bollard

The pole shaft is produced from a laminated beam of full length, one piece planks of L1 grade Alaskan Yellow Cedar, to ANSI/AITC A190.1 standards using a waterproof exterior grade adhesive. The AYC wood is harvested from well managed forests. The pole shaft is 5.5” (140mm) diameter. A central internal wireway of 1.0” (25mm) diameter is provided. Read More
adminArchitectural Wood Bollard
mast-ultaspot-led

UltaSpot LED Flood Light

The UltaSpot LED family was designed to provide our customers with high quality and efficient lighting over an extremely large range of wattage and outputs. Based upon a modular architecture, the USLED can replace traditional HID luminaries from 400W to 2000W with crisp 4000K or 5000K light in choice of either 70 or 80CRI minimum. The USLED introduces the highest ...
adminUltaSpot LED Flood Light
Screen Shot 2015-09-20 at 5.52.53 PM

Slim Flexible Cathode Light Strip

The Slim Flexible Cathode Light Strip is the latest evolution of our flexible cathode product line. With minimal dimensions (1 5/8” wide and 2 3/8” tall with lamp installed) this luminaire can flex and bend to accept almost any shape, size or curvature of lamp that our factory can manufacture. Its small dimensions and lack of any remote wiring or ...
adminSlim Flexible Cathode Light Strip
Advent

PEN-0704

This model may be mixed and matched with any mounting and canopy options. Easy installation to standard J-box. Options for angled ceilings Available in a variety of finishes. Currently available for indoor dry/damp location only. Custom Lamping options available Made in America Standard Sizes Are: 8″ x 32″ 8″ x 42″ 8″ x 62″ Go To Product Page
adminPEN-0704
sigseries

Signature Series

Using the ancient artform of metal spinning, Signature Series fixtures are available in your choice of base metals: aluminum, brass, copper or galvanized steel. The series features a variety of mounting options and shading systems. Constructed using the architect’s original designs, these matched components can be custom configured to enhance the design aesthetics of striking architectural environments– adding an element ...
adminSignature Series
Screen Shot 2015-08-21 at 12.23.27 PM

Flight Calo Spot II

The Flight Calo Spot II incorporates spring clips in the socket to hold the MR16 lamp in place to make re-lamping tooless and simple. Go To Product Page
adminFlight Calo Spot II